High Combustion Efficiency CFB Boiler With Coal / Biomass Fuel , Power Station Boiler 35T/h
Product Details
| Condition: | New | Structure: | Fluidized Bed |
|---|---|---|---|
| Fuel: | Coal / Biomass | Water Circulation: | Natural Circulation |
| Pressure: | High Pressure | Range Of Applications: | Industrial/Power Station |
| Specification: | Customized | Manufacturing Level: | A |
| Place Style: | Vertical | Burning Style: | Fluidized Bed Furnace |
| After-Sales Service Provided: | Engineers Available To Service Machinery Overseas | ||
| Highlight |
circulating fluidized bed boilers,coal fired boiler |
||
Product Description
35t/h High Combustion Efficiency circulating Fluidized Bed Boiler with Asme Certificate
Product Description
HD circulating fluidized bed boiler is energy saving which is mainly installed at power plants to generate electricity.
HD CFB boiler adopts stationary equipment design theory and CFB boiler technical parameter.
Circulating fluidized bed is of low-temperature combustion, therefore, nitrogen oxides emissions of such boiler is much lower than that of coal-powder boiler, and such boiler could directly desulfurized during combustion process. Circulating fluidized bed boiler with high desulfurization rate is economical.
Parameter
| Item | Unit | Specification | |
| Model | HD-35/3.82-M | HD-35/5.3-M | |
| Rated evaporation | t/h | 35 | |
| Rated steam pressure | MPa | 3.82 | 5.3 |
| Rated steam temperature | ℃ | 450 | 450 |
| Feed water temperature | ℃ | 150 | 150 |
| Fuel type | Anthracite, lean coal, bituminous coal, lignite, petroleum coke, breeze, etc. | ||
| Furnace height | M | 22 | |
| Furnace section | m2 | 9.6 | |
| Number of coal feeder | Unit | 2 | |
| Super heater thermostat mode | Spray desuperheater | ||
|
Unburned carbon (bituminous coal) |
% | <6 | |
| Pre-heater air temperature | ℃ | 140 | |
| Exhaust gas temperature | ℃ | 145 |
|
Main features
1. Load range: 30-110%
2. Low burining temperature
3. High efficiency: 85%-90%
4. Wide adaptability to coals: Soft coal, anthracite, lean coal, etc.
Certifications
Competitive Advantage
Quality control and management to the whole produce process, including ingot smelting, hot-rolling, heat treatment, machining and strictly final inspection prior to delivery.
Excellent product quality and service, competitive price, “in-time” delivery
Product Highlights
35t/h High Combustion Efficiency circulating Fluidized Bed Boiler with Asme Certificate Product Description HD circulating fluidized bed boiler is energy saving which is mainly installed at power plants to generate electricity. HD CFB boiler adopts stationary equipment design theory and CFB boiler ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
