High Safety Level Boiler Manifold Header with 1 Year Warranty and 5 Years Core Components Warranty
Product Details
| Type: | Natural Circulation | Structure: | Fire Tube And Water Tube |
|---|---|---|---|
| Pressure: | Low / High Pressure | Steam Production: | Max. 20t/h |
| Style: | Horizontal | Fuel: | Coal / Gas / Coal-fired / Water Heat |
| Output: | Hot Water / Steam | Surface Treatment: | Painted |
| Diameter (OD): | ∅76mm~∅914mm | Max Length: | 23000mm |
| Temperature Range: | 300~1500℃ | Material Options: | 20G, SA-106B, SA-106C, 15CrMoG, 12Cr1MoVG, SA-335P12, SA335-P22, SA-335P91, SA-335P122, SA-335P92 |
| Header Types: | Water Wall Header, Superheater Header, Economizer Header | Construction Type: | End Cover Type Or Necking Down Type |
| Operation Mode: | Steam Distribution With Bypass And Drain Valves | ||
| Highlight |
High Safety Level Boiler Manifold Header,1 Year Warranty Steam Manifold Header,5 Years Core Components Warranty Steam Header |
||
Product Description
| Diameter (OD) | ∅76mm~∅914mm |
|---|---|
| Length (Max) | 23000mm |
| Temperature (℃) | 300~1500 |
- Carbon steel: 20G, SA-106B, SA-106C
- Low-alloy thermal resistant steel: 15CrMoG, 12Cr1MoVG, SA-335P12, SA335-P22
- Middle-alloy thermal resistant steel: SA-335P91
- Special material (ultra-supercritical): SA-335P122, SA-335P92
Product Highlights
Custom-built steam headers for industrial boilers, available in carbon/alloy steel. Features stress-relieved fabrication, max 20t/h steam production, and 5-year core warranty. Ideal for power stations & construction. US showroom available.
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
