Carbon Steel Boiler Headers with Max. 20t/h Steam Production and Natural Circulation Water Tube Design
Product Details
| Type: | Natural Circulation | Structure: | Water Tube |
|---|---|---|---|
| Pressure: | High Pressure | Steam Production: | Max. 20t/h |
| Style: | Horizontal | Output: | Hot Water |
| Design Fuel: | Coal Fuel | Material: | Special Boiler Steel Plate |
| Applicable Fuel: | Biomass Forming Granules | Fuel: | Coal-fired |
| Weight: | 1-20 Ton | Diameter: | 76mm~914mm |
| Length: | 23000mm | Temperature: | 300~1500℃ |
| Core Components: | NoEnName_Null | ||
| Highlight |
Max. 20t/h Boiler Headers,Natural Circulation Steam Headers,Water Tube Boiler Manifold Headers |
||
Product Description
Headers collect and distribute steam or water from or to a series of smaller pipes or conduits. Manufactured from carbon or ferritic steel, typically matching the grade of the piping systems. Unlike piping systems which are usually butt welded and bent, headers maintain a straight configuration.
The operational pressures and temperatures depend on the connected component. Headers connected to economizers or water wall panels face less severe material requirements than those connected to superheaters or reheaters.
Available in carbon steel to high-alloy ferritic steels (including T/P91 and T/P92), with diameters ranging from 88.9 mm to 406.4 mm.
Steam boiler pressure part headers with large diameter longitudinal welded pipes include:
- Water wall headers
- Superheater headers
- Economizer headers
These components serve to collect, mix, and redistribute working medium. Structurally classified as either end cover type (end enclosure) or necking down type.
| Parameter | Value |
|---|---|
| Diameter (OD) | Ø76mm~Ø914mm |
| Length (Max) | 23000mm |
| Temperature | 300~1500℃ |
Address: No.1 Dongli Road, Donglai, Zhangjiagang City, Jiangsu Province, China
Tel: +86 (0) 512 5866 6196
Fax: +86(0) 512 5877 4453
Web: www.boilerfabrication.com
Product Highlights
High-pressure carbon steel boiler headers for industrial power plants, compliant with American standards. Features natural circulation, water tube structure, and max 20t/h steam production. Custom sizes (76-914mm OD), 1-year warranty, 5-year core component coverage. Certified for safety with overseas engineer support.
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
