![]() |
MOQ: | 100 pcs |
Price: | 2,000 - 5,000 USD per pc |
Standard Packaging: | Sea worthy Packing for Exporting with Iron Frame |
Delivery Period: | Within 90 Days after getting the down payment or L/C |
Payment Method: | T/T, L/C at sight |
Supply Capacity: | About 1,000 tons per month |
High-Efficiency Superheater and Reheater Coils for Biomass Boilers
What issues can occur in superheaters/reheaters?
Scaling, overheating, corrosion, and ash deposition are common problems.
Differences
Type | Advantages | Disadvantages | Supporting method |
Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs a slow restart to purge the water that accumulates in the bottom. | supported from above |
Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
Horizontal -type |
1. Proper drainage 2. Good structural rigidity. |
1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
Principle
• Principle of superheater is similar to steam generating tubes of boiler.
• The hot gases at high temperature sweep over superheater tubes and raise the temperature of steam which magnitude depends upon exit gas temperature leaving the superheater and gas velocity.
Application
Use for heating saturated steam, steam temperature could be up to 900 degree C.
Superheater Capacity Upgrades to Increase Power Generation
Send us required technical data, such as steam capacity, presure, required temperature etc. We will design accordingly.
![]() |
MOQ: | 100 pcs |
Price: | 2,000 - 5,000 USD per pc |
Standard Packaging: | Sea worthy Packing for Exporting with Iron Frame |
Delivery Period: | Within 90 Days after getting the down payment or L/C |
Payment Method: | T/T, L/C at sight |
Supply Capacity: | About 1,000 tons per month |
High-Efficiency Superheater and Reheater Coils for Biomass Boilers
What issues can occur in superheaters/reheaters?
Scaling, overheating, corrosion, and ash deposition are common problems.
Differences
Type | Advantages | Disadvantages | Supporting method |
Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs a slow restart to purge the water that accumulates in the bottom. | supported from above |
Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
Horizontal -type |
1. Proper drainage 2. Good structural rigidity. |
1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
Principle
• Principle of superheater is similar to steam generating tubes of boiler.
• The hot gases at high temperature sweep over superheater tubes and raise the temperature of steam which magnitude depends upon exit gas temperature leaving the superheater and gas velocity.
Application
Use for heating saturated steam, steam temperature could be up to 900 degree C.
Superheater Capacity Upgrades to Increase Power Generation
Send us required technical data, such as steam capacity, presure, required temperature etc. We will design accordingly.