ASME Standard Stainless Steel Boiler Superheater for Power Station Boilers and Waste Incinerator
Product Details
| Product Name: | Boiler Superheater | Material: | Stainless Steel |
|---|---|---|---|
| Standard: | ASME, EN, GB | Application: | Power Station And Industrial |
| Highlight |
Stainless Steel Superheater And Reheater,ASME Superheater And Reheater,Power Station Superheater And Reheater |
||
Product Description
ASME Standard Stainless Steel Boiler Superheater for Power Station Boilers
Superheater
A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an allowable range (normally varies from 540°C to 500°C)when the boiler is over loaded.
Super heater types:
The outside diameter of the pipe is generally 30-60mm. The convection superheater is the most commonly used, and the serpentine tube type is adopted. It has a relatively dense tube group, which is arranged in the flue of 450-1000 ℃ flue gas temperature, and is subject to the transverse and longitudinal erosion of flue gas. The flue gas mainly transfers heat to the pipe by convection, and some of it absorbs heat by radiation. The platen superheater is composed of several tube platens, which are arranged in the upper part of the furnace or at the outlet. It belongs to radiant or semi radiant superheater. The former absorbs radiant heat of furnace flame, while the latter also absorbs part of convective heat.
In the power plant boiler above 10 MPa, two kinds of superheaters, platen type and serpentine tube type, are generally used to increase heat absorption. The wall type superheater applied on the inner wall of furnace is radiation type superheater, which is seldom used. The wall wrapped superheater is used in large capacity utility boilers to form the wall of the furnace top and convection flue, and the light furnace wall is made of heat insulation material. The figure shows the arrangement of several superheaters. The small capacity industrial boiler with superheater can meet the requirement only with convection superheater of single-stage tube group.
Details
| 1 | Material composition | Carbon steel, alloy steel or stainless steel, collection boxes and other supporting material. Tubes are customized types of specifications. |
| 2 | Design pattern | Vertical or horizontal layout. |
| 3 | Advantages | Beautiful appearance, size, accuracy, first-class bending and welding technology, first-class detection equipment. |
Product Highlights
ASME Standard Stainless Steel Boiler Superheater for Power Station Boilers Superheater A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
