ASME Standard Serrated Spiral Boiler Fin Tube with Customized Specifications for Enhanced Heat Transfer
Product Details
| Base Tube O.D: | 25.4 Mm ~1600mm | Base Tube Thickness: | 2.5 Mm ~40 Mm |
|---|---|---|---|
| Fin Height: | 0.5 Mm ~20.0 Mm | Fin Thickness: | 0.5 Mm ~3.0 Mm |
| Fin Pitch: | 5 Mm ~25.4 Mm | Material: | Carbon Steel, Alloy Steel, Stainless Steel |
| Length: | 0<L≤12000 | Base Pipe Type: | Welded Or Seamless |
| Surface Treatment: | Painted | Fuel Type: | Biomass, Coal, Gas, Waste |
| Structure: | Water Tube | Supply Ability: | 500 Tons Per Month |
| Fin Type: | Serrated Spiral | Standard: | ASME |
| Heat Transfer: | Extended Surface Area | ||
| Highlight |
ASME Standard Boiler Fin Tube,Serrated Spiral Finned Tube,Customized Specification Heat Exchanger Fin Tube |
||
Product Description
- Welded finned tubes
- Extruded finned tubes
- Welded helical solid finned tubes
- Welded serrated finned tubes
- Welded helical serrated finned tubes
| Item | Range |
|---|---|
| Base Tube O.D (mm) | 25.4 mm ~ 1600 mm |
| Base Tube Thickness (mm) | 2.5 mm ~ 40 mm |
| Fin Height (mm) | 0.5 mm ~ 20.0 mm |
| Fin Thickness (mm) | 0.5 mm ~ 3.0 mm |
| Fin Pitch (mm) | 5 mm ~ 25.4 mm |
| Material | Carbon Steel, Alloy Steel, Stainless Steel |
| Length | 0 < L ≤ 12000 mm |
Material: Carbon steel, alloy steel, stainless steel, non-ferrous alloys and nickel alloys
Application: Economizer, Evaporator, Superheater, Air heater and related systems
- Impact test and Strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report for welding seams
- Hydraulic test report to ensure standard working pressure and safety
After Sales:
Delivery Terms: FOB, CFR, CIF, EXW, FCA
Payment Currency: USD, CNY
Payment Type: T/T, L/C, MoneyGram, Western Union, Cash
Languages: English, Chinese
Product Highlights
ASME-certified serrated spiral fin tubes for boilers. Enhances heat transfer efficiency in power/industrial stations. Custom sizes in carbon/alloy/stainless steel. 38+ years manufacturer with full quality control.
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
