Energy Saving Exhaust Gas Boiler Economizer with Max. 20t/h Steam Production and 5 Years Warranty for Core Components
Product Details
| Type: | Natural Circulation | Structure: | Fire Tube And Water Tube |
|---|---|---|---|
| Pressure: | Low / High Pressure | Steam Production: | Max. 20t/h |
| Style: | VERTICAL | Fuel: | Coal / Gas / Coal-fired / Water Heat |
| Output: | Hot Water / Steam | Surface Treatment: | Painted |
| Material: | Alloy Steel, Carbon Steel, SA210C, SA213T22 | Material Standard: | ASTM, EN Or ISO |
| Weight Range: | Min: 10 Ton Max.:1000 Ton | Smelting Process: | EF+LF + VD |
| Process: | Material->Ingot -> Hot/Cold-Rolling-> Heat Treatment (Normalizing+ Tempering) -> Inspection ->rough Machining->UT ->2nd Heat Treatment ->finishing Machining ->Inspection | UT Standard: | ASTM A388 Or EN10228 |
| Heat Exchanger Type: | H Finned Tube, Spiral Finned Tube | ||
| Highlight |
Max. 20t/h Steam Production Boiler Economizer,1 Year Warranty Exhaust Gas Economizer,5 Years Warranty Spiral Fin Tube Economizer |
||
Product Description
Boiler economizers are high-efficiency heat exchange devices with finned tubes designed to heat liquids (typically water) without exceeding the boiling point. Our product line includes three specialized types of boiler economizers:
- Bare tube economizer
- H-finned tube economizer
- Spiral finned tube economizer
The H-finned tube economizer offers superior performance compared to bare tube models:
- Expanded heat exchange area with reduced tube count
- Increased flue gas flow area to minimize flow speed and abrasion
- Available in double H-finned configuration for enhanced rigidity in long tube rows
- Spiral finned design combats abrasion and extends service life
Economizers significantly reduce cooling costs by allowing compressor shutdown while maintaining adequate cooling capacity, resulting in substantial energy savings.
| Description | Boiler economizer |
|---|---|
| Material | Alloy steel, Carbon steel, SA210C, SA213T22, etc. |
| Material standard | ASTM, EN or ISO |
| Dimension | Customizable |
| Weight | 10 ton - 1000 ton |
| Smelting Process | EF+LF+VD |
| Manufacturing Process | Material→Ingot→Hot/Cold-Rolling→Heat treatment→Inspection→Rough machining→UT→2nd Heat treatment→Finishing machining→Final inspection |
| UT standard | ASTM A388 or EN10228 |
- Impact test and strength calculation reports with material information
- 100% NDT (non-destructive inspection) of steel plate, tube, and electrode
- X-ray, γ-ray, and liquid penetrant test inspection for welding seams
- Hydraulic test reports to verify working pressure and safety standards
Product Highlights
Energy Saving Exhaust Gas Boiler Economizer Spiral Fin Tube Product Description Boiler economizers are high-efficiency heat exchange devices with finned tubes designed to heat liquids (typically water) without exceeding the boiling point. Our product line includes three specialized types of boiler ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
