High Thermal Efficiency Horizontal Boiler Economizer with Max. 60t/h Steam Production for Power Stations
Product Details
| Type: | Natural Circulation | Usage: | Power Station |
|---|---|---|---|
| Structure: | Water Tube | Pressure: | High Pressure |
| Steam Production: | Max. 60t/h | Style: | Horizontal |
| Fuel: | Coal-fired | Output: | Hot Water |
| Material: | Special Boiler Steel Plate | Thermal Efficiency: | 92.4%--94.5% |
| Working Pressure: | High Pressure | Weight: | 1-20 Ton |
| Smelting Process: | EF+LF + VD | Process: | Material->Ingot -> Hot/Cold-Rolling-> Heat Treatment (Normalizing+ Tempering) -> Inspection ->rough Machining->UT ->2nd Heat Treatment ->finishing Machining ->Inspection |
| UT Standard: | ASTM A388 Or EN10228 | ||
| Highlight |
High Thermal Efficiency Boiler Economizer,Horizontal Boiler Economizer,Max. 60t/h Steam Production Boiler Part |
||
Product Description
- Bare tube economizers
- H-finned tube economizers
- Spiral finned tube economizers
- Expanded heat exchange surface area
- Reduced number of required tubes
- Increased flue gas flow area to decrease flow speed and abrasion
| Description | Boiler economizer |
|---|---|
| Material | Alloy steel, Carbon steel, SA210C, SA213T22, etc. |
| Material standard | ASTM, EN or ISO |
| Dimension | Customized |
| Weight | 10-1000 tons |
| Smelting Process | EF+LF+VD |
| Process | Material→Ingot→Hot/Cold-Rolling→Heat treatment→Inspection→Rough machining→UT→2nd Heat treatment→Finishing machining→Inspection |
| UT standard | ASTM A388 or EN10228 |
- Impact test and strength calculation report with applied materials information
- 100% NDT (non-destructive inspection) report of steel plate, tube, and electrode
- X-ray, γ-ray, and liquid penetrant test inspection reports for all welding seams
- Hydraulic test report to verify standard working pressure and safety
Product Highlights
Factory Price Power Plant Serpentine Tube Boiler Economizer Boiler Part Product Description Boiler economizers are heat exchange devices with finned tubes that heat liquids (typically water) to temperatures approaching but not exceeding the liquid's boiling point. We manufacture three types of ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
