SA210A1 Boiler Economizer for Waste Incinerator ASME Standard
Product Details
| Product Name: | Boiler Economizer | Application: | Waster Incinerator |
|---|---|---|---|
| Material Of Base Tube: | SA210A1 | Tube Dimension: | OD50.8mm*5.17mm MWT |
| Production Technique: | Tube Bending | Fabrication Standard: | ASME |
| Highlight |
ASME standard boiler economizer,waste incinerator economizer,SA210A1 boiler economizer |
||
Product Description
| Attribute | Value |
|---|---|
| Product Name | Boiler Economizer |
| Application | Waste Incinerator |
| Material of Base Tube | SA210A1 |
| Tube Dimension | OD50.8mm*5.17mm MWT |
| Production Technique | Tube Bending |
| Fabrication Standard | ASME |
The Boiler Economizer SA210A1 with handcuffs and tube shields is designed for waste incinerator applications. This heat recovery device is installed at the lower part of the boiler tail flue to efficiently recover waste heat from exhaust gases.
| Description | Specification |
|---|---|
| Material | SA210A1 and SA36 |
| Material standard | ASME |
| Dimension | Customization |
| Weight | Min: 10 ton Max: 1000 ton |
- Material preparation
- Tube Bending and Bevelling
- Butt Welding
- Shield Manufacturing
- Assembly 1
- RT (Radiographic Testing)
- Handcuffs and Shields Welding
- Assembly 2
- Hydro Test
- Cleaning and Painting
- Packing into Frames
The boiler economizer operates in three distinct heating stages: feed water preheating, evaporation, and superheating. As the first stage in this process, the economizer preheats feed water, making it the lowest temperature heating surface in the boiler steam and water circuit. The working fluid passing through this equipment is monophasic water (non-boiling economizer).
- Recovers waste heat from exhaust gases
- Reduces flue gas exhaust temperature
- Improves energy efficiency
- Suitable for industrial applications
- Customizable dimensions and specifications
- ASME standard fabrication
Our products have been widely implemented in major power plants across China, delivering stable and significant economic benefits. We maintain a strong focus on product development and quality improvement, while actively expanding our international market presence through strategic partnerships.
Product Highlights
Boiler Economizer SA210A1 with Handcuffs and Tube Shields for Waste Incinerator Product Specifications Attribute Value Product Name Boiler Economizer Application Waste Incinerator Material of Base Tube SA210A1 Tube Dimension OD50.8mm*5.17mm MWT Production Technique Tube Bending Fabrication Standard ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
