High Heat Exchange Performance Boiler Air Preheater For Coal Fired Power Station Boilers
Product Details
| Type: | Tubular | Application: | Power Station Maintenance |
|---|---|---|---|
| Material: | Carbon Steel | Advantage: | Good Sealing, High Heat Transfer Efficiency |
| Color: | Customer's Requirement | Trade Mark: | HD BOILER |
| Packing: | Iron Frame Package | Usage: | Industry/Power Station |
| Highlight |
High Heat Boiler Air Preheater,High Performance Boiler Air Preheater |
||
Product Description
High Heat Exchange Performance Boiler Air Preheater for Coal-Fired Power Station Boilers
General Introduction: Air Preheater
Air preheater is a kind of preheating equipment that improves the heat exchange performance of the boiler and reduces heat loss. It can conduct the heat carried in the flue gas discharged from the flue at the tail of the boiler to the air before entering the boiler through the heat sink to preheat the air to a certain temperature.
Air preheater is mostly used in coal-fired power station boilers. It can be divided into two types: tube box type and rotary type, of which the rotary type is divided into two types: wind hood rotary type and heating surface rotary type. Power station boilers often use rotary preheaters on the heating surface. The application in boilers is generally two-bin, three-bin, and four-bin, of which four-bin is more commonly used in circulating fluidized bed boilers.
Working Principle
Taking the rotary air preheater as an example to illustrate the principle of air preheater, it will rotate slowly during operation, the flue gas will enter the flue gas side of the air preheater and then be discharged, and the heat carried in the flue gas will be absorbed by the heat sink in the air preheater, and then the air preheater rotates slowly, the heat sink moves to the air side, and then the heat is transferred to the air before entering the boiler.
The application of air preheater in boiler is mostly three-compartment type, with fire alarm system, gap adjustment system and frequency conversion control system. Air preheaters are easy to use, simple to operate, safe to operate, and can improve the heat exchange performance of the boiler system, so it is very commonly used in flue gas boiler systems.
Details
The main heat transfer component of tubular air preheater is thin-walled steel tube. The tubular air preheaters are mostly cubic. The steel tubes are arranged vertically and staggered with each other. Both ends are welded on the upper and lower tube sheets.The tubular air preheater is equipped with an intermediate tube sheet in the tube box. The flue gas passes through the preheater up and down the pipe, while the air passes through the preheater horizontally to complete heat transfer.
Tubular air preheater is widely used in power station boilers and industrial boilers because of its advantages of good sealing, high heat transfer efficiency, easy manufacturing and processing. The shortcomings of tubular air preheater are large volume, easy ash plugging of steel tube content, difficult cleaning and easy wear and tear at flue gas inlet.
Function
1.Improve and intensify combustion
The air after passing through the waste heat collector enters the furnace, which accelerates the drying, ignition and combustion process of the fuel, ensures the stable combustion in the boiler, and improves the combustion efficiency.
2. Strengthen heat transfer
Radiative heat transfer in the furnace is enhanced due to the improved and intensified combustion in the furnace and the increase in the temperature of the hot air entering the furnace, which increases the average temperature level in the furnace.
3. Reduce the loss in the furnace, reduce the exhaust gas temperature, and improve the thermal efficiency of the boiler
Due to the stable combustion in the furnace and the intensification of radiant heat exchange, the loss of chemical incomplete combustion can be reduced;On the other hand, the air preheater uses the waste heat of flue gas to further reduce the exhaust gas loss, thus improving the thermal efficiency of the boiler.According to experience, when the air is raised by 1.5 °C in the preheater, the exhaust gas temperature can be reduced by 1 °C. After the air preheater is installed in the boiler flue, if the air waste heat can be reduced by 150-160 °C, the exhaust gas temperature can be reduced by 110-120 °C, which can increase the boiler thermal efficiency by 7%-7.5%. It can save 11%-12% of fuel.
For laminar furnaces, there is hot air that can be used with fuel with higher moisture and ash content, and for power station boilers, hot air is an important desiccant and pulverized coal conveying medium for pulverizing systems.
Parameter
Layout item |
Horizontal layout | Vertical layout |
| Tube arrangement |
staggered arrangement / |
staggered arrangement / |
| Sealing of pipe and plate |
Packing heat- resistant material/ |
welding |
| Anti-wearing |
a,when gas scours external tube, welcoming smoke tubes have protective tile |
|
Enamel air preheater products are classified as following by application
1.Enamel heat exchanger designed for denitration renovation projects
2.Enamel heat exchanger for circulating fluidized bed boiler and pulverized coal boilers Heat
exchanger parts for garbage incinerators and biomass boilers
3.Heat exchanger parts for grate furnaces, like chain grate furnaces4.Heat exchanger parts for gas-fueled boilers, such as kerosene boilers, coke ovens, etc.
Product Highlights
High Heat Exchange Performance Boiler Air Preheater for Coal-Fired Power Station Boilers General Introduction: Air Preheater Air preheater is a kind of preheating equipment that improves the heat exchange performance of the boiler and reduces heat loss. It can conduct the heat carried in the flue ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
