Effective Heat Exchanger For Hot Water / Steam Output Placed Before ESP Or Before FGD
Product Details
| Application: | Boiler System | Operation: | Natural Circulation/Force Cirulation |
|---|---|---|---|
| Packing: | Iron Frame Package | Output: | Hot Water / Steam |
| Usage: | Power Station | Material: | Carbon Steel |
| Boiler Capacity: | 1T-10T | Design Pressure: | 1-10MPa |
| Highlight |
Steam Output Heat Exchanger,Effective Heat Exchanger,Heat Exchanger For Hot Water |
||
Product Description
Product Description:
(1) HDB consistently executes successful boiler economizer installations using safe, cost-effective methods. Economizers improve boiler performance by increasing fuel efficiency and improving steam generation and response time.
(2) We can guide you through the process of installing or retrofitting existing boiler systems .
Our expert boiler economizer and waste heat recovery system installations can reduce your overall fuel requirements, lower emissions, and ultimately reduce your boiler operating costs.
Details
• Superheating raises overall efficiency as well as avoids too much condensation in last stages of turbine which avoids blade erosion.
• The heat of combustion gases from furnace is utilised for removal of moisture from steam and to superheat the steam.
• Super-heaters ususlly have several tube circuits in parallel with one or more return bends,connected between headers.
• Heat from the hot gases to the vapour in the surperheater is transferred at high temperatures.
• Therefore promary section of superheater is arranged in counterflow and secondary section in parallel flow to reduce the temp.stressing of the tube wall.
Differences
| Type | Advantages | Disadvantages | Supporting method |
| Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom. | supported from above |
| Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
| Horizontal -type |
1. Proper drainage 2. Good structural rigidity. |
1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
FAQ:
- Q: What is the brand name of this product?
A: The brand name of this product is HD Boiler. - Q: What is the model number of this product?
A: The model number of this product is Boiler economizer. - Q: Where is this product manufactured?
A: This product is manufactured in China. - Q: What certifications does this product have?
A: This product is certified by ASME, ISO9001:2015, and ISOEN3834. - Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 3 tons. - Q: Is the price of this product negotiable?
A: Yes, the price of this product is negotiable. - Q: How is this product packaged?
A: This product is packaged in iron frames. - Q: How long is the delivery time for this product?
A: The delivery time for this product depends on the quantity ordered. - Q: What are the payment terms for this product?
A: The payment terms for this product are 30% after contract and balance 70% before shipment, or 100% L/C at sight. - Q: What is the supply ability of this product?
A: The supply ability of this product is 100 tons per month.
Product Highlights
Product Description: (1) HDB consistently executes successful boiler economizer installations using safe, cost-effective methods. Economizers improve boiler performance by increasing fuel efficiency and improving steam generation and response time. (2) We can guide you through the process of ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
