SA192M Q235B ASME Standard Boiler Economizer For Feed Water Heating
Product Details
| Application: | Power Plant Boilers And Industrial Boilers | Material: | SA192M And Q235B |
|---|---|---|---|
| Product Name: | Economizer | Standard: | ASME |
| Keywords: | Economizer Coil | Dimension Of Tube: | 38.1*3.2 |
| Highlight |
Q235B Boiler economiser coil,SA192M Boiler economiser coil,ASME Standard Boiler economiser coil |
||
Product Description
ASME Standard Boiler Economizer for Sugar Mill Boiler Made of SA192M and Q235B
Description
Boiler economizer is kind of heat exchanger to heat the feed water using the flue gas heat. The flue gas coming from the tube outside is up and down cross-flow scrubbing the tube bundle, passing the heat to the tube wall. The water is flowing from bottom to top, and absorts the heat from the tube wall, and its temperature is getting high. This way not only can countercurrent heat transfer to save metal consumption, but also is good for water/steam to flow and exhaust as well as decreasing corrusion. One more, this way works well for dust cleaning.
| Diameter | 32Φ 38Φ |
| Type |
Casting iron economizer;bare tube economizer;finned tube Economizer;spiral finned tube economizer |
| Fin height | Less than 17mm |
| Fin pitch | 2.1-5mm |
| Fin thickness | 3-4mm |
| material |
Tube:Carbon steel,alloy steel, customized Fin:copper;Aluminum |
| advantages |
1.better product quality and longer service life. 2.energy conservation and environmental protection. 3.significantly improve cycle efficiency. |
The economizer can absorb the heat of high temperature flue gas,reduce the exhaust temperature,save energy,and improve the efficiency of boiler.
Non-standard size please provide these parameter
| Boiler economizer(gas liquid heat exchanger)design | ||||
| Flue gas inlet(temp.) | Flue gas outlet(temp.) | Liquid inlet(temp.) | Liquid outlet(temp.) | Flue gas flow |
| ºC | ºC | ºC | ºC | m3/h |
Product Highlights
ASME Standard Boiler Economizer for Sugar Mill Boiler Made of SA192M and Q235B Description Boiler economizer is kind of heat exchanger to heat the feed water using the flue gas heat. The flue gas coming from the tube outside is up and down cross-flow scrubbing the tube bundle, passing the heat to ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
