ASME Economizer Spiral Heat Exchanger Fin Tube
Product Details
| Material: | ND Steel | Standard: | Carbon Steel |
|---|---|---|---|
| Packing: | Iron Frame Package | Specification: | Customized |
| Condition: | New | Application: | Heat Exchange Part For Boiler |
| Highlight |
Economizer Heat Exchanger Fin Tube,Spiral Heat Exchanger Fin Tube,ASME spiral fin tube |
||
Product Description
Product Description
H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface.
H-fin Tubes also have a high rate of fusion welds and weld tensile strength.H-fin Tube is assembled with the H economizer, which has high efficiency,little resistance,less wear and light weight.
Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside;as in heat transfer from a liquid to a gas,vapor to a gas ,such as steam to air heat exchanger, thermic fluid to air heat exchanger, when an extended surface is needed on only one fluid side or when the operating pressure needs to be contained on one fluid side.
| Finned Tube | |
| Application | It is widely used for Heat exchanger,Economizer and other parts of Heat Industry. |
| Material of base pipe | Carbon steel,Alloy steel |
| Material of fins | Carbon steel,Alloy steel |
| Type of base pipe | Seamlesss,Welded |
| Type of fins | H or HH |
| OD of Base pipes | 15mm-219mm |
| Length of blank area | according to Customer's request. |
| Length of finned tubes | ≤23m |
Company
Product Highlights
Product Description H-fin Tubes have two steel discs,with fluorescent tubes symmetrically welded together to form fins creating a shape that looks somewhat like the letter"H",creating an efficient energy saving, extension heating surface. H-fin Tubes also have a high rate of fusion welds and weld ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
