Seamless Bending tube Heat Exchanger Superheater And Reheater HRSG
Product Details
| Condition: | New | Structure: | Electric Elements |
|---|---|---|---|
| Fuel: | Coal/Gas/Oil-fired,Water Heat | Type: | Natural Circulation/Once Through |
| Pressure: | Low/High Pressure | Range Of Applications: | Industry/Power Station |
| Specification: | Customized | Manufacturing Level: | A |
| Surface Treatment: | Painted | Output:: | Hot Water/Steam |
| Highlight |
Seamless Superheater And Reheater,CFB Boiler Superheater And Reheater,Heat Exchanger Superheater And Reheater |
||
Product Description
Seamless high pressure Performance Heat Exchanger Superheater and Reheater For For CFB boiler
Steam Superheater in Boiler Manufacturer in China:
Reasons to buy steam superheater from HDB:
Our boiler superheaters come with adequate safety features to prolong the life of a superheater as well as your equipment where the steam is used.
The safety valve is installed in a super-heater to prevent operating pressure to exceed the design pressure of a superheater in the boiler.
We manufacture steam superheaters that suit different type of fuels such as:
1.Solid Fuels (Wood, Rice Husk, Bagasse, Coal)
2.Liquid and Gas fuels (Light and Heavy Oils, Natural Gas)
3.Electrical operated steam boiler superheaters.
Product Description
For power plant boiler, it is a crutial way to increase thermal economy of thermal power station by improving parameter of superheated steam. The increase of superheated steam parameters are limited by metal materials. The design of superheaters must make sure that the temperature of outer wall of heating surface pipes is lower than allowable temperature of oxidation resistance of steel, and meanwhile make sure its mechanical strength. with the development of metal material used in boilers, pwoer station boilers in our country already generally apply high pressure, high temperature(9.8MPa, 540 degrees) and superhigh pressure parameters(13.7 MPa, 540 and 555 degrees), and have developed subcritical pressure parameters(16.7MPa, 540 and 555 degrees). Now lots of boilers apply supercritical pressure parameters(24.5MPa, 540-570 degrees), and even very few units apply higher pressure and temperture parameters.
ASME certificate boiler parts boiler superheater China factory direct sell
1) Both Radiant-Convective and 100% Convective Available
2) Assemblies Completely Self-Supporting (No Intermediate Support Brick Required
3) All Elements of Equivalent Length Ensuring Balanced Flow
4) Conservative Velocities Inside Tubes Assure Positive Cooling at All Loads
5) Fully Drainable
Differences
| Type | Advantages | Disadvantages | Supporting method |
| Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom. | supported from above |
| Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
| Horizontal -type |
1. Proper drainage 2. Good structural rigidity. |
1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
Features
As outstanding features, Heat Efficiency Improving boiler parts reheater for Steam Boiler have beautiful appearance, accurate sizes, advanced bending and welding technique, first-lass testing equipment and guaranteed quality.
Thechnical parameters
| Material | carbon steel, alloy steel , or durable heat steel |
| Tube OD | 10-114mm |
| Tube W.T. | 0.8mm- 15mm |
| Structure | vertical or horizontal |
Workshop
Application
use for heating saturated steam, steam temperature could be up to 900 degree C.
Superheater Capacity Upgrades to Increase Power Generation
Send us required technical data, such as steam capacity, presure, required temperature etc. We will design accordingly.
Certifications
HD Boiler offers a best in class facility,including
- Fabrication area of 200,000 square meters
- 80 Engineers
- 200 Coded welders
- 30 Licensed Inspectors (including NDT level-lll instructors)
- Grade-ALicenses for Design and Manufacture boiler (issued by the State Administration of Quality Supervision and Inspection)
- ISO 90001:2008 Quality System
- ASME Certificate of Utility Boiler
- ASME‘S’ , ‘U’ and NB stamp authorization
Product Highlights
Seamless high pressure Performance Heat Exchanger Superheater and Reheater For For CFB boiler Steam Superheater in Boiler Manufacturer in China: Reasons to buy steam superheater from HDB: Our boiler superheaters come with adequate safety features to prolong the life of a superheater as well as your ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
