Thin Walled Steel Tubular Air Preheater For CFB Coal - Fired Boilers In Power Station
Product Details
| Type: | Tubular | Name: | Boiler Air Pre Heater |
|---|---|---|---|
| Application: | Thermal Power Station And Industrial Boilers | Material: | Thin-walled Steel Tube |
| Fuels: | Coal | Warranty: | Two Years |
| Highlight |
air preheater for boiler,air preheater in thermal power plant |
||
Product Description
Thin-walled Steel Tubular Air Preheater for CFB Coal-fired Boilers in Power Station and Industry
General Introduction
Air preheater is a kind of equipment which can improve the heat exchange performance of the boiler and reduce the energy consumption. The function of the air preheater is to heat the flue gas discharged from the tail flue of the boiler and transmit it to the air before entering the boiler through the radiator, so as to preheat the air to a certain temperature.
The air preheater is generally used for coal-fired boilers in power station.It can be divided into tubular type and rotary type. The rotary type can be further divided into wind hood rotary type and heating surface rotary type.Power stations usually use the heating surface rotary air preheater. Generally, the application in boilers is two-compartment, three-compartment and four-compartment, among which the four-compartment is more commonly used in CFB boilers.
Working principles
Take the rotary type as a example to illustrate the working principles of air preheaters, when under operation, it would be slowly rotating, and exhaust gas will enter the gas flue side of air preheater, and then be dicharged. The heat carried by the gas flue will be absorbed by the cooling ribs of the air preheater, then the air preheater will be rotating slowly, the cooling ribs work to the side of the air, delivering the heat to the air before the air enters the boiler.
Classification
According to the way of heat transfer, the air preheater can be divided into two types:heat conduction type and regeneration type.Among the heat conduction type, tubular air preheater is most commonly used.With the increase of boiler parameters and capacity, the heating surface of tubular air preheater increases, which brings difficulties to the arrangement of the tail heating surface. Therefore, most of the large capacity units adopt a compact, light weight rotary air preheater. Air preheater is generally divided into three types: plate type, rotary type and tubular type.
The main heat transfer component of tubular air preheater is thin-walled steel tube. The tubular air preheaters are mostly cubic. The steel tubes are arranged vertically and staggered with each other. Both ends are welded on the upper and lower tube sheets.The tubular air preheater is equipped with an intermediate tube sheet in the tube box. The flue gas passes through the preheater up and down the pipe, while the air passes through the preheater horizontally to complete heat transfer.
Tubular air preheater is widely used in power station boilers and industrial boilers because of its advantages of good sealing, high heat transfer efficiency, easy manufacturing and processing. The shortcomings of tubular air preheater are large volume, easy ash plugging of steel tube content, difficult cleaning and easy wear and
Parameter
Layout item | Horizontal layout | Vertical layout |
| Tube arrangement | staggered arrangement / | staggered arrangement / |
| Sealing of pipe and plate | Packing heat- resistant material/ | welding |
| Anti-wearing | a,when gas scours external tube, welcoming smoke tubes have protective tile | |
Enamel air preheater products are classified as following by application
1.Enamel heat exchanger designed for denitration renovation projects
2.Enamel heat exchanger for circulating fluidized bed boiler and pulverized coal boilers Heat
exchanger parts for garbage incinerators and biomass boilers
3.Heat exchanger parts for grate furnaces, like chain grate furnaces4.Heat exchanger parts for gas-fueled boilers, such as kerosene boilers, coke ovens, etc.
Product Highlights
Thin-walled Steel Tubular Air Preheater for CFB Coal-fired Boilers in Power Station and Industry General Introduction Air preheater is a kind of equipment which can improve the heat exchange performance of the boiler and reduce the energy consumption. The function of the air preheater is to heat the ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
