Superheater Boiler Part Heat Transfer , Anti Corrosion Reheater In Boiler For Power Plant
Product Details
| Condition: | New | Type: | Natural Circulation / Once Through |
|---|---|---|---|
| Materaial: | Carbon Steel/Stainless Steel | Output: | Hot Water / Steam |
| Specification: | Customized | Surface Treatment: | Painted |
| Range Of Applications: | Industry / Power Station | Weight: | 10~1000 Tons |
| Highlight |
superheater in boiler,reheater in power plant |
||
Product Description
Superheater Boiler Part Heat Transfer , Anti Corrosion Reheater In Boiler For Power Plant
Description
Heaters and superheater are a set of tubes located in a boiler.Water vapor enters the superheater from the water wall and heats to above saturation temperature until it reaches the required maximum operating temperature.Superheated steam flows to the high-pressure turbine through the main steam pipe.The steam discharged from the high-pressure turbine is directed to the boiler for reheating and from the boiler to the medium-low pressure turbine.High temperature heating can improve the output and efficiency of power plants.
Function
A reheater is basically a superheater that superheats steam exiting the high-pressure stage of a turbine. The reheated steam is then sent to the low-pressure stage of the turbine. By reheating steam between high-pressure and low-pressure turbine it is possible to increase the electrical efficiency of the power plant cycle beyond 40%.The reheat cycle is used in large power boilers since it is feasible economically only in larger power plants.
Application
Surper is a heat exchange part of boiler which widely used in energy industrail.
Manufacturing and acceptance criteria
JB/T1611 " Technical specification for manufacturing of boiler pipes."
JB/T1612 "boiler pressure test technical conditions. "
JB/T1613 "Technical specification for welding of pressure parts of boiler."
JB/T1615"Technical specification for painting and packing of boiler."
JB/T3375 "Rules for receiving acceptance of materials for boiler construction."
Workshop
Product Highlights
Superheater Boiler Part Heat Transfer , Anti Corrosion Reheater In Boiler For Power Plant Description Heaters and superheater are a set of tubes located in a boiler.Water vapor enters the superheater from the water wall and heats to above saturation temperature until it reaches the required maximum ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
