Export Amercian Sprial Type Integral Boiler Economizer ND Steel Or Carbon Steel
Product Details
| Material: | Carbon Steel / ND Steel | Destination: | Amercia |
|---|---|---|---|
| Output: | Steam / Hot Water | Type: | Natural Circulation |
| Application: | Boiler System | Fuel: | Flue Gas |
| Highlight |
power plant economizer,economizer for boiler |
||
Product Description
Export amercian sprial type integral economizer ND steel or carbon steel
Product Description
· Economizers are mechanical devices intended to reduce energy consumption,or to perform useful function such as preheating a fluid.In simple terms,an economizer is a heat exchanger.
· In a steam boiler ,it is a heat exchanger device that heats up fluids or recovers residual heat from the combustion product i.e. flue gase in thermal power plant before being released through the chimney.
· Flue gases are the combustion exhaust gases produced at power plants consist of mosly nitrogen,carbon dioxide,water vapor,soot carbon monoxide etc.
· Hence,the economiser in thermal power plants,is used to economise the process of electrical power generation,as the name of the device is suggestive of.
· The recovered heat is in turn used to preheat the boiler feed water,that will eventually be converted to super-heated steam.
· Thus,saving on fuel consumption and economising the process to a large extent, as we are essentially gathering the waste heat and applying it to,where it is required.
· Nowadasys however,in addition to that,the heat available in the exhaust flue gases can be economically recovered using air preheater which are essential in all pulverized coal fired boiler.
Technical specifications
Material Structure
Consists of a serious of spiral fin tubes, the headers of inlet and outlet, bend, frame and other auxiliaries.
Structure Arrangement
In line / staggered arrangement.
Working Pribciple of Economizer
1.As shown in the figure above,the flue gases coming out of the steam boiler furnace carry a lot of heat.
2.Function of economiser in thermal power plant is to recover some of the heat from the heat carried away in the flue gases up the chimney and utilize for heating the feed water to the boiler.
3.It is simply a heat exchager with hot flue gas on shell side and water on tube side with exxtended heating suface like Fins or Gills
Economisers in thermal power plant
Economisers must be sized for the volume and temperature of flue gas,the maximum prssure drop passed the stack,what kind of fuel is used in the boiler and how much energy needs to be recovered.
When the water is boiled in steam boiler,the steam is produced which is then super-heated after which it is passed to the turbines.
Then the exhausted steam from turbine blades,is passed through steam condenser of turbine in which the steam is condensed and this condensed water then is pre warmed first in feed water heater then in it before re-feeding in boiler.
It is placed in the passage of flue gases in between the exit from the boiler and the entry to the chimney.
In this a large number of small diameter thin walled tubes are placed between two headers.
The flue gases flow outside the tubes usually in counter flow.
Parameters
| Name | Economizer |
| specifications of finned tube | unit(mm) |
| Bare pipe(od) | 25-165 |
| bare pipe(thick) | 2-8 |
| finned thicks | 0.6-3.0 |
| finned height | 5-30 |
| finned tube thread pitch | 5-30 |
| finned tube length | ≤12000 |
*Note:HD BOILER can bespoke special type of economizer according to customer's requirement.
Quality Control
| · | Impact test and Strength calculation report with applied materials information. |
| · | 100%NDT(non-destructive inspection) report of steel plate, tube and electrode. |
| · | X-ray, γ-ray and liquid penetrant test inspection report (welding seam): to ensure the quality of the entire boiler. |
| · | Hydraulic test report: ensure the standard working pressure and safety. |
Product Highlights
Export amercian sprial type integral economizer ND steel or carbon steel Product Description· Economizers are mechanical devices intended to reduce energy consumption,or to perform useful function such as preheating a fluid.In simple terms,an economizer is a heat exchanger.· In a steam boiler ,it is ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
