SA516-70 Sugar Mill Pressure Boiler Drum For Storing Hot Water
Product Details
| Product Name: | Steam Drum | Application: | Boiler System And Industrial System |
|---|---|---|---|
| Material: | SA516-70 | Certification: | ISO9001, ASME, EN |
| Highlight |
SA516-70 pressure boiler drum,Sugar Mill pressure boiler drum,SA516-70 steam boiler drum |
||
Product Description
Boiler Parts Steam Drum Made of SA516-70 for Sugar Mill in ASME Standard
Definition
The boiler steam drum is the most important pressure vessel in industrial boilers for storing hot water and steam. In an industrial boiler pipe system, not all hot water can be fully evaporated into steam, but rather, a mixture of steam and hot water. Because saturated hot water needs more heat for conversion into steam, a boiler steam drum is a required piece of equipment. The steam drum separates hot water and steam, where the mixture still flows back for reheating through a down comer.
Classification
| Pressure | Low | Middle | High | Superhigh |
| Inner diameter(mm) |
∅ 800-1200 |
∅ 1400-1600 |
∅ 1600-1800 |
∅ 1600-1800 |
| Thickness(mm) | 16-25 | 32-46 | 60-100 | 80-100 |
| Material | Carbon steel | Carbon steel & Alloy steel | Carbon steel & Alloy steel | Alloy steel |
Accessories
The main components in a boiler system are the boiler feedwater heaters, deaerator, boiler, feed pump, economizer, boiler, superheater, attemperator, steam system, condenser and the condensate pump. In addition there are sets of controls to monitor water and steam flow, fuel flow, airflow and chemical treatment additions.
Quality Control
1. Impact test and Strength calculation report with applied materials information.
2. 100%NDT(non-destructive inspection) report of steel plate, tube and electrode
3. X-ray, γ-ray and liquid penetrant test inspection report (welding seam): to ensure the quality of the entire boiler
4. Hydraulic test report: ensure the standard working pressure and safety
Product Highlights
Boiler Parts Steam Drum Made of SA516-70 for Sugar Mill in ASME Standard Definition The boiler steam drum is the most important pressure vessel in industrial boilers for storing hot water and steam. In an industrial boiler pipe system, not all hot water can be fully evaporated into steam, but rather...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
