Heat Exchanger Stainless Boiler Superheater And Reheater With Shields
Product Details
| Fuel: | Coal | Type: | Anti Corrosion |
|---|---|---|---|
| Range Of Applications: | Power Plant | Specification: | Customized |
| Surface Treatment: | High Corrosion | Certification: | ISO, ASME |
| Highlight |
Superheater And Reheater With Shields,Boiler Superheater And Reheater,Stainless Superheater And Reheater |
||
Product Description
Heat Exchanger Stainless Boiler Superheater And Reheater With Anti Corrosion Shields
Superheater is a part of boiler that further heats steam from saturated temperature to superheat temperature, also known as steam superheater. The superheater can be divided into convection type, radiation type and half radiation type according to the heat transfer mode. According to the structural features can be divided into serpentine tube type, screen type, wall type and package wall type. They are made up of a number of parallel pipes and an inlet and outlet header.
Reheater
Reheater is essentially a kind of steam superheater which reheats the low-pressure steam which has been overdone and reaches a certain temperature. The reheater further improves the heat efficiency of power plant circulation and controls the steam temperature of the final stage blade of steam turbine within the allowable range. A reheater is a heater that converts steam from a steam turbine into superheated steam. There are two functions of reheater. One is to reduce the humidity of water vapor, which is helpful to protect turbine blade. Second, the relative internal efficiency and absolute internal efficiency can be improved.
In power station boilers, the effect of superheaters is to heat the steam to certain temperature for higher efficiency of the power station. Reheaters are steam superheaters to reheat the over-worked long-pressure or middle-pressure steam to certain temperature.
The use of rehearters can further improve heat power of the power station circulating and control the steam temperature of the end blades of the steam turbine within allowed range. Zigzag superheaters and reheaters of the Company are also unique with rigorous production technique, first-class production flow line and complete test methods.
Advantage
Surperheater
1.Superheater is a device for heating saturated steam into superheated steam at a certain temperature.
2. After the saturated steam is heated into superheated steam, the work capacity of steam in the steam turbine is improved, that is, the useful enthalpy of steam in the steam turbine is increased, thus improving the cycle efficiency of the heat engine.
3. In addition, the adoption of hot steam can also reduce steam exhaust humidity of steam turbine, avoid corrosion of steam turbine blade, and create favorable conditions for further reduction of steam exhaust pressure and safe operation of steam turbine.
Reheater
1. Reduce the humidity of water vapor, which is conducive to the protection of turbine blades.
2. The relative and absolute internal efficiency of steam turbine can be improved.
Send us required technical data, such as steam capacity, presure, required temperature etc. We will design accordingly.
Differences
| Type | Advantages | Disadvantages | Supporting method |
| Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom. | supported from above |
| Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
| Horizontal -type |
1. Proper drainage 2. Good structural rigidity. |
1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
Application
use for heating saturated steam, steam temperature could be up to 900 degree C.
Superheater Capacity Upgrades to Increase Power Generation
Product Highlights
Heat Exchanger Stainless Boiler Superheater And Reheater With Anti Corrosion Shields Superheater is a part of boiler that further heats steam from saturated temperature to superheat temperature, also known as steam superheater. The superheater can be divided into convection type, radiation type and ...
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Carbon Steel SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
